An ice water cooling chair is not an air conditioner and not a fan. It is a folding outdoor chair with cooling channels in the seat and backrest, fed by a separate box of ice water sitting beside it. The chair itself is ordinary in the ways that matter - it folds, it has a tall back, and it carries your drink - and the cooling is a second system that you bring along.
That is worth saying plainly at the start, because the honest version of the claim is narrower than the one most listings make. The chair cools a seating surface; it does not cool the air around you.
This article explains how the system is put together, what can be specified, and which figures a manufacturer should not publish before a sample is signed off.
Start with the scope. Cool water sits in an insulated box beside the chair. A hose runs from the box to the chair, where the water passes through cooling channels built into the seat and backrest before returning. The seated person rests against a surface that is being cooled from within.
What it is not:
Two parts do the work: the chair (frame, seating surface, controls) and the water box (an insulated container that holds the ice water and connects by hose).
The active part of the system is the water loop. Ice water from the box is circulated through channels in the chair, and because the water is colder than the seat it passes through, heat moves from the seating surface into the water and is carried away.
This is a different route to comfort than the heating products we usually build. In a heating film, the job is to put warmth into a surface evenly. Here the job is the reverse: move heat out of a surface and into a fluid. Both problems are solved the same way - by spreading the exchange across an area rather than concentrating it at a point - and that is the same reasoning we describe in how a far-infrared heating film works and in the comparison between resistance wire and graphene heating. A cooling channel and a heating layer are both exercises in moving energy across a surface predictably.
A note on the diagrams: the cooling path shown in this product's artwork is labelled concept illustration. It explains the idea of the loop rather than documenting a final channel layout. The final routing is confirmed on your approved sample.
The chair is built to fold flat and to stay stable once opened. Each part has one job.
| Part | What it does |
| Tall backrest | Supports the shoulders and upper back, not just the seat |
| Cross-brace folding frame | Gives the chair its rigidity and lets it fold flat |
| Riveted pivot joints | The folding points; riveted rather than bolted |
| Flat hinged foot pads | Widen the contact with the ground so the legs do not sink or slip |
| Stitched textile panel | The seating and back surface; a stitched panel rather than a single sheet |
| Foam armrest sleeves | Padding over the arms |
| Low-mounted cup pouch | Holds a drink within reach, lower down so it does not interfere with the arm |
| Water box and hose | The ice water source, connected to the chair |
Two words in that table are deliberate. The frame is a cross-brace design: the orange diagonals you see are what stops the chair racking sideways, which is the failure mode of cheaper folding chairs. And the foot pads are flat and hinged rather than simple caps, so they sit on the ground properly on soft surfaces instead of spearing into them.
The chair carries a snowflake-marked control on the armrest strap, which is where the system is switched or adjusted. What it changes, and how many settings it has, are set per project - we do not publish a temperature or a speed for it, and the section below explains why.
The seating surface is a stitched textile panel. Stitching is not decoration here: a panel made in sections is easier to build the cooling channels into, and it holds its shape better than a single sheet under repeated folding. The armrests are wrapped in foam sleeves, which matter more than they sound on a chair you sit in for hours.
Cleaning guidance follows the final materials and construction, so it belongs on the care instructions of your approved sample rather than in a paragraph here. What we will say is that a chair with a water-carrying channel inside it is cleaned to a different procedure than a plain folding chair, and that procedure is part of the specification.
Every item below is a specification item on the platform, not a fixed feature of one model.
| Category | What can be set |
| Fabric and colour | Seat and back textile, dyed to your reference |
| Frame colour | Reference range shows six frame colours |
| Private label | Woven label and your logo on the chair |
| System configuration | Cooling channels, hose routing and the control on the arm |
| Accessories | Cup pouch and box layout |
| Packaging | Printed carton for a retail or distributor programme |
The order process is the same one we run across our products: requirements, sample review, order confirmation, production. The stage worth slowing down is the sample review, because frame, fabric, channel routing and packaging all interact. Changing the hose exit point, for example, moves where the box sits, which changes the packaging footprint. Agreeing those together on a sample is what keeps a programme on schedule.
This is the section most listings leave out, so we will state it directly rather than let a reader assume the numbers are simply missing.
The following are set per project and confirmed against the approved sample, and are therefore not published as fixed figures:
One point deserves its own line, because it is the easiest place to over-promise: a chair that carries water is not automatically a waterproof or water-resistant product. Those are certification terms with their own testing, and we do not use them unless they have been earned. What the chair has is a closed cooling loop. That is a functional statement, not an ingress rating.
We would rather hand you an accurate sample and a test report than a headline figure that will not survive contact with a retailer's compliance team. If any of the figures above is a hard requirement for your programme, raise it at the design stage and it becomes a defined, testable specification.
Dongguan Sheerfond New Material Co., Ltd. develops and manufactures far-infrared and graphene heating materials, and designs the thermal systems around them. We supply both graphene and resistance-wire heating solutions, and our low-voltage range covers 3.7 V, 5 V, 12 V, 24 V and 36 V architectures. Products are manufactured against project specifications with batch inspection records rather than from a fixed catalogue.
Buyers with a defined market, a specific colourway or a private-label programme are welcome to send requirements for a design and sample review.
Send us your target market, the fabric and frame direction you need, the system configuration you have in mind, your branding and packaging requirements, and your target quantity. We will come back with a design proposal and a sample plan.
Price indication: the chair is quoted at US$25-45 per unit for a standard configuration, depending on frame specification, fabric, system configuration and order quantity. This is a per-unit reference for a made-to-order product, not a fixed catalogue price, and final pricing follows your confirmed specification and destination market.
Contact us: Request a quotation →
This chair is not a medical device and is not intended to diagnose, treat or cure any condition, including heat-related illness. It provides personal comfort cooling of the seating surface only; it does not cool the surrounding air.
Contact Person: Masum Billah
Tel: +8616620605160
USB Graphene Electric Heated Pad Sleeping Bag For Camping 195×75cm Size
Leather Electric Heating Desk Pad With 45degrees Temperature Sheerfond
61cm Width Electric Sleeping Bag Liner , Self Heating Sleeping Bag With 5V 2A Power
SHEERFOND Electric Pet Heating Pad , Pet Warming Mat For Dogs And Cats
Smart Electric Beverage Warmer OEM , Coffee Cup Heater 140-149Fahrenheit Temperature
Waterproof Lunch Box Warmer Heater Bag Oxford Cloth PVC Material OEM
Graphene Heating Sheet Wrist Warmer Wrist Guard Hand Heating Pad For Wrist Brace
