 |
| Place of Origin: | Dongguan, China |
| Brand Name: | sheerfond |
| Model Number: | XF-CP001 |
| Minimum Order Quantity: | To be confirmed per project |
|---|---|
| Price: | USD218-238 per unit |
| Packaging Details: | Carton configuration for retail or distributor programmes, subject to confirmed order |
| Delivery Time: | To be confirmed per project |
| Payment Terms: | L/C, D/A, D/P, T/T |
| Supply Ability: | To be confirmed per project |
Round Tub · Fabric Wall with Vertical Supports · Buckled Cover · Two Hose Connections · External Chiller Unit · OEM / ODM Project Configuration
This is a round ice bath tub supplied with a separate square chiller unit. The tub holds the water; the unit circulates water out of the tub, removes heat from it and returns it, so the cold you start with is held rather than lost. The two are joined by two hoses, with a filter canister sitting in the hose line.
The design answers a practical problem. A tub of water with ice in it is cold once, and then the ice is gone. A chiller keeps removing heat for as long as it runs, which is what turns a cold plunge into something you can repeat without restocking ice.
The tub itself stays simple and portable: a broad rounded rim, a fabric wall held upright by vertical supports, and a separate cover that fastens down with webbing straps and clips. The unit is a closed square case with the hose connections on top and a vent on the side.
The setup is offered in two configurations: the tub on its own, or the tub together with the external unit and its hoses and filter. Both are legitimate purchases, and the difference is written down at the order stage so the scope is unambiguous.
This page describes a configurable platform. Tub colourway, unit case finish, tub size, cover arrangement, hose configuration, branding and packaging are all specification items.
Appearance and dimensions follow the approved sample and the approved drawings.
It is a tub of cold water and a unit that keeps the water cold. That is the whole product.
It is not a heater. The unit is a chiller; it cools water and does not warm it. A project that needs warm water is a different machine.
It is not a medical device and not a therapy device. It is not intended to diagnose, treat, cure or prevent any disease. We make no claim about what cold water immersion does for your body — only about what the equipment does with the water.
It is also not a fixed catalogue item. The size drawing that ships with this product is titled “dimensions to confirm”, because the final outer diameter, tub height, port positions and unit footprint are settled on the approved drawing for your order.
| Item | Detail |
|---|---|
| Product type | Round ice bath tub with an external chiller unit |
| Configuration | Tub only, or tub with the external unit, hoses and filter |
| Tub rim | Broad rounded rim for grip on entry and exit |
| Tub wall | Fabric wall with vertical supports |
| Cover | Separate cover with webbing straps and clips |
| Water connections | Two tub ports; two external hoses to the unit |
| Filtration | Filter canister in the hose line |
| Unit | Square external case; top hose connections; side vent |
| Unit function | Circulates and cools water (does not heat) |
| Accessory | Side pocket on the tub wall |
| Tub colourway | Custom — reference range shows three tub styles |
| Unit case | Custom — reference range shows three case finishes |
| Tub size | Custom sizes offered; confirmed on the approved drawing |
| Branding | Private label for OEM and ODM projects |
| Packaging | Carton configuration for retail or distributor programmes |
| MOQ | To be confirmed per project |
| Price | Quoted per project (see the note below) |
| Delivery time | To be confirmed per project |
Capacity, temperature settings, cooling performance, electrical specification, dimensions, weight, filter specification and the supplied-item list are set per project and are not published here. See the note below.
Five elements make up the reference configuration, and naming them makes the rest of this page easier to follow.
| Element | What it is |
|---|---|
| 01 Rounded rim | The top ring of the tub; the grip point on entry and exit |
| 02 Fabric wall and supports | The tub body, held upright by vertical supports |
| 03 Cover straps | The cover fastens with webbing straps and clips |
| 04 Square external unit | The chiller, sitting on the floor beside the tub |
| 05 Two hose connections | Two tub ports, two hoses, and a filter in the line |
Water leaves the tub through one port, passes through the unit where heat is removed, and returns through the other. The filter sits in that route. Because the tub and the unit are separate objects, either can be placed where it suits the room, within the reach of the hose set.
System configuration and hose layout are confirmed on the approved sample.
Three details decide how the tub behaves in daily use.
| Detail | Why it matters |
|---|---|
| Rounded rim | A broad, rounded rim is easier on the hands when lowering yourself in or climbing out — exactly when a secure grip matters most |
| Fabric wall and vertical supports | The wall is a fabric panel held by supports, which is what makes the tub free-standing and packable |
| Cover with webbing straps and clips | A cover does two jobs: it keeps debris out between sessions, and it slows heat coming back into the water when the tub is not in use |
Fabric composition, wall construction and the fittings used at each port are confirmed on the approved sample, because they are the parts most likely to be specified differently from one project to the next.
On cleaning: a tub and a water circuit are cleaned to a procedure, not a slogan. That procedure depends on the final materials, so it is stated on the care instructions of your approved sample rather than in a marketing paragraph.
The unit is a closed square case with the hose connections on top and a vent on the side for air movement. It sits on the floor beside the tub and is connected by the two hoses.
Because the unit is an electrical appliance operating next to a body of water, its electrical specification, installation conditions and certification position are confirmed per project. We do not publish figures for these here, and we would be cautious of any listing that does. Ventilation clearance around the case, the distance the unit sits from the tub, and the power available at the installation point all have to be settled with the site in mind.
Electrical specification and installation conditions are confirmed with the approved sample and the site survey.
Cold water immersion carries real risk, and it is not a disclaimer paragraph — it is the operating instruction. Please read it as one.
This product is not a medical device. It is not intended to diagnose, treat, cure or prevent any disease, and it is not a therapy device. It is a tub of cold water. Any benefit you get from using it is your own experience, not a claim this page is making.
Every item below is a specification item. The list is deliberately broad, because a project is usually decided by exactly these details.
| Item | What can be set |
|---|---|
| Tub colourway | Reference range shows three tub styles |
| Unit case finish | Reference range shows three case finishes |
| Tub size | Custom size options, confirmed on the drawing |
| Cover | Cover style and fastening arrangement |
| Water connections | Port positions and hose configuration |
| Filter | Filter arrangement in the hose line |
| Configuration | Tub only, or tub with the external unit |
| Branding | Private label for OEM and ODM projects |
| Packaging | Carton configuration for retail or distributor programmes |
Available options depend on the final sample and confirmed order.
The design review runs in four stages.
| Step | Stage |
|---|---|
| 1 | Brief — market, configuration, colourway, case finish, size direction and quantity |
| 2 | Design Review — drawings, layout and a written specification for your approval |
| 3 | Sample Approval — you confirm appearance, fittings and configuration |
| 4 | Order Spec — the confirmed specification is recorded and manufacturing follows it |
Process and options subject to confirmed order.
OEM and ODM here describe the project enquiry route, not a promise of unlimited variation: the available options, the installation conditions and the supplied-item list are all confirmed against the approved sample and the confirmed order.
The checklist that ships with this product is a pre-order list, not a packing list. It asks a buyer to confirm five things, and the order is deliberate.
| Before ordering, confirm | Why it matters |
|---|---|
| Tub exterior and cover | Colourway and cover style are specified per project |
| Unit case version | The case is offered in more than one finish and must match the tub |
| Two hose connections | Fittings and hose length have to suit the layout |
| Size drawing | Outer diameter, height, port position and unit footprint follow the approved drawing |
| Approved sample | The final reference for appearance and dimensions |
Confirm configuration before order. A project that settles these at the sample stage does not have to reopen them at the packing stage.
A short list of things this page deliberately does not state, and why:
We would rather hand you an approved sample, a drawing and a written specification than a headline number that will not survive a buyer’s compliance review. If any figure above is a hard requirement for your project, raise it at the design stage and it becomes a defined, testable specification.
Dongguan Sheerfond New Material Co., Ltd. develops and manufactures far-infrared and graphene heating materials, and designs the thermal systems built around them — in both directions. Our low-voltage heating range covers 3.7 V, 5 V, 12 V, 24 V and 36 V architectures, and our cooling programmes apply the same principle in reverse: moving heat out of a surface or a volume of water rather than into it.
Products are manufactured against project specifications with batch inspection records rather than from a fixed catalogue.
Send us your target market, the configuration you need (tub only, or tub with the unit), the colourway and case finish, your branding and packaging requirements, your target quantity, and — for a complete setup — what the installation site looks like in terms of power and drainage. We will come back with a design proposal and a sample plan.
Price indication: a setup is quoted per project, because the tub size, the unit specification and the configuration all move the number. Final pricing follows your confirmed configuration, order quantity and destination market.
Contact us: Request a quotation →
This product is not a medical device and is not intended to diagnose, treat, cure or prevent any disease. Cold water immersion carries risk: never use it alone, consult a doctor first if you have a heart or circulatory condition, high blood pressure, diabetes or epilepsy, or if you are pregnant, and get out immediately if you feel unwell. Not for unsupervised use by children. This unit cools water and does not heat it. Capacity, temperature settings, cooling performance, electrical specification and dimensions are confirmed per project.
Contact Person: Masum Billah
Tel: +8616620605160
USB Graphene Electric Heated Pad Sleeping Bag For Camping 195×75cm Size
Leather Electric Heating Desk Pad With 45degrees Temperature Sheerfond
61cm Width Electric Sleeping Bag Liner , Self Heating Sleeping Bag With 5V 2A Power
SHEERFOND Electric Pet Heating Pad , Pet Warming Mat For Dogs And Cats
Smart Electric Beverage Warmer OEM , Coffee Cup Heater 140-149Fahrenheit Temperature
Waterproof Lunch Box Warmer Heater Bag Oxford Cloth PVC Material OEM
Graphene Heating Sheet Wrist Warmer Wrist Guard Hand Heating Pad For Wrist Brace
