logo
Send Message
Home ProductsElectric Heated Pad

Graphene Heated Seat Cushion, 5V USB Power Bank Heated Chair Pad with Honeycomb Graphene Film 3 Levels and Overheat Protection, Anti-Slip Base Custom Logo OEM ODM

Graphene Heated Seat Cushion, 5V USB Power Bank Heated Chair Pad with Honeycomb Graphene Film 3 Levels and Overheat Protection, Anti-Slip Base Custom Logo OEM ODM

  • Graphene Heated Seat Cushion, 5V USB Power Bank Heated Chair Pad with Honeycomb Graphene Film 3 Levels and Overheat Protection, Anti-Slip Base Custom Logo OEM ODM
  • Graphene Heated Seat Cushion, 5V USB Power Bank Heated Chair Pad with Honeycomb Graphene Film 3 Levels and Overheat Protection, Anti-Slip Base Custom Logo OEM ODM
  • Graphene Heated Seat Cushion, 5V USB Power Bank Heated Chair Pad with Honeycomb Graphene Film 3 Levels and Overheat Protection, Anti-Slip Base Custom Logo OEM ODM
  • Graphene Heated Seat Cushion, 5V USB Power Bank Heated Chair Pad with Honeycomb Graphene Film 3 Levels and Overheat Protection, Anti-Slip Base Custom Logo OEM ODM
  • Graphene Heated Seat Cushion, 5V USB Power Bank Heated Chair Pad with Honeycomb Graphene Film 3 Levels and Overheat Protection, Anti-Slip Base Custom Logo OEM ODM
Graphene Heated Seat Cushion, 5V USB Power Bank Heated Chair Pad with Honeycomb Graphene Film 3 Levels and Overheat Protection, Anti-Slip Base Custom Logo OEM ODM
Product Details:
Place of Origin: Dongguan, China
Brand Name: sheerfond
Model Number: XF-SC001
Payment & Shipping Terms:
Minimum Order Quantity: Low MOQ, to be confirmed per project
Price: USD9.8-10.7 per unit
Packaging Details: Custom retail packaging box, subject to confirmed order
Delivery Time: To be confirmed per project
Payment Terms: L/C, D/A, D/P, T/T
Supply Ability: To be confirmed per project
Contact Now
Detailed Product Description

Graphene Heated Seat Cushion

5V USB Power Bank · Honeycomb Graphene Heating Film · 3 Levels with LED Button · Overheat Protection · Breathable Linen Face · Anti-Slip Dotted Base · Side Battery Pocket · OEM / ODM

 

Graphene heated seat cushion in grey linen on a wooden chair with a side battery pocket, showing seat-only heating

Product Description

This is a seat cushion with a graphene heating film bonded inside it, arranged in a honeycomb matrix. The face is a breathable, wear-resistant linen weave; under the film sits a thermal reflective base film; the bottom is a silicone dotted anti-slip rubber base.

It is powered by a 5V/2A USB power bank connected through the original charging cable to an LED push button on the side, which cycles three levels. A side pocket hangs off the edge to hold the power bank.

The power bank is not included. The cushion ships with its cable; the battery is supplied by the user, and it must be rated 5V/2A or above. This is the single most important line on this page for a retailer, because it sets expectations before the first support ticket.

The heating is seat-only by design. The backrest of a chair is not heated, and the cushion does not attempt to be a heated chair cover.

It is a comfort product. It warms a seat. It is not a medical device, and this page makes no claim about back pain, joints, muscles, circulation or any other condition.

 

What This Cushion Is — and What It Is Not

It is a portable warm seat that runs from a power bank you already own, on chairs you already have.

It is not waterproof and not water-resistant. The reference material states plainly that it must not be used while wet. This is a textile-covered electrical product and it should be kept dry.

It is not a chair heater. At 5V it warms a small area in contact with a seated person, not the room and not the whole chair.

And it is not a medical or therapy device. Warmth feels good; warmth is not treatment.

 

Product Specifications

Item Detail
Product type Heated seat cushion, flat, portable
Power input 5V/2A USB (power bank rated 5V/2A or above)
Cable Original charging cable included
Power bank Not included — supplied by the user
Heating element Graphene heating film, honeycomb matrix
Control LED push button, 3 levels
Levels High (red) / Medium (white) / Low (blue)
Automatic Constant temperature sensor; auto overheat protection
Heating area Seat only — backrest not heated
Top face Breathable wear-resistant linen weave
Insulation Flame-retardant insulation layer
Reflective layer Thermal reflective base film
Base Silicone dotted anti-slip rubber
Battery pocket Side hanging pocket
Colours Heather Grey, Beige, Charcoal, Navy
Customisation Logo, dimensions and thickness, fabric colour, retail packaging
MOQ Low MOQ; exact quantity to be confirmed per project
Price Quoted per project (see the note below)
Delivery time To be confirmed per project

Surface temperature, wattage, runtime, power bank capacity, dimensions and certification status are confirmed per project or per supplied power bank and are not published here.

 

Key Features

  • Graphene heating film in a honeycomb matrix — even warmth across the seat, not a central hot spot
  • Three levels with red, white and blue LED indication on the button
  • Intelligent constant temperature — a sensor holds the surface steady instead of letting it climb
  • Auto overheat protection — heating stops automatically if it gets too hot
  • 5V/2A USB input — runs from a power bank, not a wall socket
  • Side battery pocket — the power bank hangs clear of the seat instead of sitting loose
  • Breathable linen weave — airflow through the face, and resistance to pilling and snagging
  • Thermal reflective base film — sends heat up toward the sitter
  • Silicone dotted anti-slip base — grips the chair surface
  • Seat-only heating — the backrest is deliberately unheated
  • Flame-retardant insulation layer in the stack
  • Custom logo, colour, size and packaging for OEM / ODM programmes

 

Three Levels, and What They Mean

One button, three levels, three indicator colours. The reference material describes each level by purpose rather than by a number, and that description is more useful to a buyer than a degrees figure would be.

Level Intended use
High Red indicator — maximum warmth for cold days
Medium White indicator — cozy comfort for everyday use
Low Blue indicator — gentle warmth for all-day comfort

Two behaviours run automatically behind the button. The constant temperature sensor holds the surface steady rather than letting it keep climbing, which is what makes a long session tolerable. And auto overheat protection stops the heating if the temperature rises too far.

The reference material also quotes a rapid heat-up figure of three seconds. We pass that on with two conditions: it is quoted at a 5V/2A supply, and it should be confirmed on your approved sample rather than printed as an unconditional promise.

Honeycomb graphene heating film cutaway with three LED levels High Medium Low and overheat protection

The Four-Layer Build

Read as a specification, because each layer answers a different objection a buyer will raise.

Layer What it does
Breathable linen weave Airflow through the face so a long sit does not turn into a damp seat; the tight weave resists pilling and snagging
Honeycomb graphene matrix Divides the film into many small cells so heat spreads as a surface rather than a spot
Thermal reflective base film Bounces heat upward toward the sitter and reduces what leaks into the chair
Silicone dotted rubber base Grips the seat so the cushion does not travel when a person sits down or shifts weight

Between the film and the base there is also a flame-retardant insulation layer. We name it as the reference material names it and attach no certification to it — see the note on figures below.

Graphene heated seat cushion on a white background showing the honeycomb heated area

Power: The 5V/2A Requirement

The cushion runs from a power bank rated 5V/2A or above, using the original charging cable. Three consequences follow, and all three belong on a listing.

  • Runtime is the power bank's runtime. The cushion has no battery of its own, so there is no cushion runtime to quote. A small pocket battery gives a short session; a larger one gives a long day
  • Heat-up speed depends on the supply. Any performance figure assumes a 5V/2A input
  • The battery must fit the pocket. It is sized for a normal pocket power bank, not a laptop brick

The side pocket exists so the battery hangs off the cushion edge rather than sitting loose on the chair, where it gets sat on, dropped or left behind. It is fabric, not a compartment inside the cushion — which means the battery stays visible and swapping it takes seconds.

Side battery pocket on the heated seat cushion with three scenes: office mesh chair, dining chair and car sofa seating

Safety and Use

The reference material carries a safety instruction, and it should be reproduced verbatim on any listing:

For your safety, avoid using the cushion while it is wet. Always use the original charging cable and power bank rated 5V/2A or above.

To that we add four operating rules.

  • Keep it dry. This is a textile-covered electrical product. It is not waterproof and not water-resistant. If it gets wet, dry it completely before connecting power
  • Do not leave it running unattended for long periods, and disconnect it when you leave the seat
  • Do not cover it with a thick seat cover or a second cushion while it is heating — that traps heat and defeats the breathable face
  • Keep the power bank clear of the seat gap, and never sit or lean on it

This product is not a medical device. It is not intended to diagnose, treat or prevent any disease, and it makes no claim about back pain, joints, muscles, circulation or any other condition. It warms a seat.

Customisation Options

Item What can be set
Brand logo Woven label or silk screen
Dimensions and thickness Width, depth and thickness set to your requirement
Fabric colour Heather Grey, Beige, Charcoal, Navy, plus other colours and textures
Retail packaging Custom printed box
Commercial Low MOQ; factory direct supply

Heather Grey is the reference colourway and the sensible default for a first run, because it reads as furniture rather than as an accessory — which matters on office and dining chairs.

B2B OEM and ODM customisation for a heated seat cushion: logo, dimensions and thickness, fabric colours and packaging box

OEM / ODM: From Brief to Order Spec

Step Stage
1 Brief — colourway, logo method, dimensions and thickness, packaging, quantity
2 Drawing Review — dimensions, thickness and construction agreed on paper
3 Sample Approval — you confirm the face, the button position, the pocket and the branding
4 Order Specification — the confirmed specification is recorded before production

Process and options subject to confirmed order.

OEM and ODM here describe the project enquiry route, not a promise of unlimited variation. The available options and the supplied-item list are confirmed against the approved sample.

Figures We Do Not Publish

  • Surface temperature in degrees — the three levels are described by purpose, not by a number; a figure would depend on the supply, the room and the run time
  • Wattage — derived from the power bank the user chooses
  • Runtime and power bank capacity — the battery is not part of the product
  • Dimensions — width, depth and thickness are made to order
  • Certification status — the reference material names a flame-retardant insulation layer as a construction detail and states no certification; we do not infer one

We would rather hand you a drawing, a sample and a written specification than a headline number that will not survive a compliance review. If a figure is a hard requirement for your programme, raise it at the sample stage and it becomes a defined, testable specification.

 

About SHEERFOND

Dongguan Sheerfond New Material Co., Ltd. develops and manufactures far-infrared and graphene heating materials, and designs the heating systems built around them. Our low-voltage range covers 3.7 V, 5 V, 12 V, 24 V and 36 V architectures; this cushion is a 5 V, power-bank-format product aimed at chairs people already own. Products are manufactured against project specifications with batch inspection records.

 

Request a Quotation

Send us the colourway, the logo method, your dimensions and thickness, the packaging, your target quantity and your market. If you are matching an existing chair range, send the seat dimensions and we will work from those.

Price indication: quoted per project, because the colourway, dimensions, logo method, packaging and order size all move the number.

Contact us: Request a quotation →

 

Related Reading

 

This product is a comfort product and is not a medical device. It is not intended to diagnose, treat or prevent any disease, and it makes no claim about back pain, joints, muscles, circulation or any other condition. It is not waterproof and not water-resistant: avoid using the cushion while it is wet, keep it dry, and dry it fully before reconnecting power. Always use the original charging cable and a power bank rated 5V/2A or above; the power bank is not included. Do not leave the cushion running unattended for long periods; do not cover it with a thick seat cover while heating; keep the power bank clear of the seat gap. The heat-up figure quoted is that of the reference material at a 5V/2A supply and should be confirmed on the approved sample. Surface temperature, wattage, runtime, power bank capacity, dimensions and certification status are confirmed per project or per supplied power bank.

Contact Details
Dongguan Sheerfond New Materials Co., Ltd.

Contact Person: Masum Billah

Tel: +8616620605160

Send your inquiry directly to us
Best Products
Other Products