Graphene Heated Golf Cart Seat Cushion 5V USB Cover 128x80cm 3 Heat Settings Armrest Cutouts Storage Pockets Anti-Slip Water-Resistant Custom Size Logo OEM ODM

A heated seat cushion built for the golf cart bench, not adapted to it: a 128 * 80 cm quilted cover with two bound armrest cutouts, a graphene heating layer concentrated in the center seating area, and one button that cycles three heat settings — powered over 5V through a USB-A or Type-C connector, selected by order.

OEM / ODM. Factory direct. Grey is the reference colourway; the configurable surface is laid out below.

One Cover, Two Jobs

The reference set reads as two products in one. As a seat cover, it brings a diamond-quilted top, two bound oval cutouts that let the armrests pass through cleanly, six open pockets along the front edge, and a dotted anti-slip underside that holds it in place on smooth vinyl benches. As a heated cushion, it adds a graphene heating film under the quilted surface, mapped to the part of the bench where riders actually sit.

Heat Where Riders Sit, Not Where They Don't

The artwork marks the heating zone across the center seating area, labeled "heating area illustration." The drawing is a schematic — it communicates placement, not measured surface temperature. The construction claim behind it is simple: the heating layer sits under the middle of the bench, where two riders sit, and not in the edges that drape over the frame.

The Cycle Behind the Button

A single button on the front edge cycles through three heat settings, shown by indicator color: red for high, blue for medium, green for low. No app, no remote, no display. For rental fleets and golf shops, the whole user interface is one sentence of staff training.

Powered by 5 Volts, Connected Your Way

The electrics printed on the artwork are specific: 5V operating voltage, external power required, and a USB-A or Type-C connector chosen by order — the sheets show both plugs. Which power source ships with an order is confirmed per order; this listing does not assume a battery pack, a cart wiring kit or any supply the artwork does not name.

Sized to the Bench, Not the Catalog

The measure guide prints the checks that decide the fit — bench width, bench depth, armrest spacing — and states plainly: check your bench and armrest spacing before ordering. Custom dimensions are available, so non-standard benches go through the sample process instead of the returns process.

Water-Resistant Surface, One Cleaning Rule

The fabric surface is water-resistant — the artwork's own wording, limited to everyday splashes. It is a fabric finish statement, not an ingress-protection rating. The care line printed with it is the one rule worth writing into fleet handbooks: hand wash only as directed, and disconnect power before cleaning.

Your Logo on the Sample

The customization sheet lists four axes — color by order, dimensions by order, logo by order, packaging by order — with the standing note that the final configuration follows the approved sample. Quoting runs through a sample approval, not a catalog SKU.

What This Listing Does Not Print

The reference set publishes no wattage, no current draw, no surface temperature figures, no heat-up time, no battery or power supply specification, and no certification marks — and this listing imports none of them from other models. Each blank is filled in the confirmed order, in writing. Cart-model compatibility is handled by measurement, not by a brand list.

Where Each Line Comes From

Rules the Bench Enforces

• Set the heat level before driving off; never adjust the controls while the cart is moving
• Disconnect power before any cleaning; hand wash only as directed
• Do not use the cover with a damaged cord, connector or fabric; keep the connector dry
• A heated seat cushion is a comfort product — it is not a medical or therapy device, and not intended to diagnose, treat or prevent any disease

Fleet Questions, Straight Answers

Will it fit my carts?

Measure bench width, bench depth and armrest spacing; the standard cover is 128 * 80 cm and custom dimensions are available.

What powers it?

Any compatible 5V supply through USB-A or Type-C (by order); the power source included with an order is confirmed per order.

What is the price?

USD40-45 per unit, with the final figure following the confirmed configuration.

Can we brand it?

Yes — color, dimensions, logo and packaging are all by order, following the approved sample.

Is it machine washable?

No — hand wash only as directed, with power disconnected.

Send the bench measurements and market through our contact page — the blanks above become lines in the order specification.

The orange honeycomb pattern in the artwork is a heating-area illustration, not a thermal image. All dimensions and specifications are subject to final confirmed order; no wattage, current, temperature, battery or certification figures are published in this listing. Water resistance is claimed only as printed on the artwork — a fabric finish for everyday splashes, not an ingress-protection rating.