 |
| Place of Origin: | Dongguan, China |
| Brand Name: | sheerfond |
| Model Number: | XF-GS001 |
| Minimum Order Quantity: | To be confirmed per project |
|---|---|
| Price: | USD39.8-41.2 per unit |
| Packaging Details: | Custom carton for retail or distributor programmes, subject to confirmed order |
| Delivery Time: | To be confirmed per project |
| Payment Terms: | L/C, D/A, D/P, T/T |
| Supply Ability: | To be confirmed per project |
Water Cooling · Graphene Heating · Waterproof Cover · Buckle-Fitted to Your Bench · External Cooling Box · Custom Size, Colour, Logo & Packaging
This is a bench-seat cover for a golf cart that both cools and heats. A water circuit carries heat out of the seating surface in summer; a graphene heating layer puts warmth back into it in winter. The system runs on the cart’s 24 V supply, and the cooling box that drives the water circuit sits on the floorboard as a separate unit.
The design answers a problem that any cart owner recognises. A vinyl bench seat sits in direct sun and stores heat with nowhere to send it; in winter the same seat is cold on contact and gives nothing back. A cover that can move heat in either direction is the only way to address both halves with one product.
The cover itself is built to stay put: an elasticated edge pulls it over the bench, the reverse is textured so it grips instead of sliding, and buckle straps run underneath. The top surface is smooth and made to a waterproof seat-cover design, so rain beads on it rather than soaking in.
The range is offered in two configurations: the cover on its own, or the cover together with the external cooling box and tubes that make the cooling mode work.
This page describes a configurable platform. Size, colour, logo, packaging and configuration are all specification items, and the cover is cut to your bench measurements.
Size and configuration follow the confirmed order and the approved sample.
It is a seat cover that provides comfort heating and comfort cooling of the seating surface. That is the whole product.
It is not a medical device and not a therapy device, and it makes no therapeutic claim. A heated seat is not a treatment for a back, joint or circulatory condition, and this page will not suggest otherwise — whatever other listings may say.
It is not a substitute for the cart’s own seat, and it is not universal. It is cut to the measurements you supply, which is a more reliable fit than a model list that goes out of date when a cart is revised.
And it is not a plug-and-play electrical accessory. The 24 V connection is a project decision made against your cart, and it is covered in its own section below.
| Item | Detail |
|---|---|
| Product type | Dual-mode bench-seat cover for golf carts |
| Modes | Water cooling, or graphene heating — chosen one at a time |
| Operating voltage | 24 V DC |
| Cooling method | Water circuit through an external cooling box and two tubes |
| Internal cooling layer | Polyurethane (PU) |
| Heating layer | Graphene heating layer, specified for this model |
| Controls | Power button on the cover, beside the 24 V interface |
| Outer cover | Smooth seating surface, waterproof seat-cover design |
| Reverse | Textured, with buckle straps |
| Fitting | Elasticated edge; pulled over the bench seat |
| Water ports | Dual water ports for the two tubes |
| Configuration | Cover only, or cover with the external cooling box and tubes |
| Size | Custom length and depth, to your bench measurements |
| Colour | Custom — reference range shows several colourways |
| Branding | Custom logo on the cover |
| Packaging | Custom carton for retail or distributor programmes |
| MOQ | To be confirmed per project |
| Price | Quoted per project (see the note below) |
| Delivery time | To be confirmed per project |
Temperature, heat settings, wattage and current draw, dimensions, load rating, weight and certification status are set per project and are not published here. See the note below.
The system has three visible parts: the bench-seat cover, the external cooling box, and the two transparent tubes that join them. The system diagram states the operating basis plainly — 24 V, water cooling, graphene heating.
| Part of the system | What it does |
|---|---|
| Cooling | Water leaves the cooling box, travels through the cover and returns. Because the water is cooler than the seating surface, heat moves out of the seat and into the water. The internal cooling layer is polyurethane (PU). |
| Heating | A separate layer warms the seat. The graphene heating layer is specified for this model, and is switched from the panel on the cover. Graphene is chosen because it spreads warmth across an area rather than concentrating it in a line. |
| Power | A 24 V interface at the edge of the cover, next to the power button. |
| Selection | The two modes are alternatives, not simultaneous. You choose one for the season. |
Why graphene matters here: the surface being warmed is a bench, and a bench is wide. A heating layer that concentrates its output along a few lines leaves cold gaps between them; one that spreads it across the area does not. That principle is set out in [what a far-infrared heating film is and how it works](https://www.heated-cloth.com/news/what-is-a-far-infrared-heating-film-working-principle-409169.html) and in the [comparison between resistance wire and graphene heating](https://www.heated-cloth.com/news/resistance-wire-vs-graphene-heating-an-oem-buyer-s-guide-410935.html).
System configuration and layer specification follow the approved sample.
The cover has two faces, and the difference between them is deliberate.
| Detail | Why it matters |
|---|---|
| Top surface | Smooth — the face you sit on. This is the surface the waterproof seat-cover design applies to, and the artwork shows water beading on it rather than soaking in, which is what makes the cover usable in rain and practical to wipe down |
| Reverse | Textured — a textured reverse grips the bench instead of sliding across it |
| Buckle straps | Run underneath the seat and hold the cover in place as people climb in and out |
| Elasticated edge | The cover pulls over the bench rather than sitting on top of it |
Three components on the cover are worth knowing by name, because they are the parts that get handled: the dual water ports where the two tubes connect, the power interface that combines the button and the 24 V socket, and the buckle straps on the reverse.
On cleaning: a cover with a water circuit inside it is cleaned to a procedure rather than a slogan. That procedure depends on the final materials, so it is stated on the care instructions of your approved sample.
The cooling box is external, sitting on the floorboard rather than inside the seat. That is what lets the cover stay thin enough to pull over a bench, and it is also the part that needs the most thought during installation.
The two tubes run between the box and the cover, connecting at the dual water ports. The power button and the 24 V interface sit together on the cover, within sight of the driver.
Box placement, tube routing and the electrical connection are confirmed with the site and the vehicle.
A seat cover is a vehicle accessory, and the installation is where safety is decided.
This product is not a medical device. It is not intended to diagnose, treat, cure or prevent any disease, and it does not relieve or treat any muscular, joint or circulatory condition. It provides comfort heating and cooling of a seating surface only.
Every item below is a specification item. The list is deliberately broad, because a programme is usually decided by exactly these details.
| Item | What can be set |
|---|---|
| Size | Custom length and custom depth, to your bench measurements |
| Colour | Reference range shows several colourways |
| Logo | Your branding on the cover |
| Packaging | Custom carton for retail or distributor programmes |
| Configuration | Cover only, or the full dual-mode system with cooling box and tubes |
| Heating layer | Graphene heating layer, specified for the model |
Available options depend on the final sample and confirmed order.
| Step | Stage |
|---|---|
| 1 | Brief — cart type, bench measurements, season priority, colourway, branding and quantity |
| 2 | Design Review — pattern, layer specification and a written specification for your approval |
| 3 | Sample Approval — you confirm fit, finish, controls and packaging |
| 4 | Order Spec — the confirmed specification, including measurements, is recorded before production |
Process and options subject to confirmed order.
OEM and ODM here describe the project enquiry route, not a promise of unlimited variation. The available options, the installation conditions and the supplied-item list are all confirmed against the approved sample and the confirmed order.
The pre-order checklist for this product asks a buyer to settle five things, and the order is deliberate.
| Before ordering, confirm | Why it matters |
|---|---|
| Bench-seat measurements | Length and depth. The cover is cut to those numbers — measure the bench itself, not the cushion that sits on it |
| Cover only, or full system | Decides whether the cooling box and tubes are included |
| Where the box will sit | It needs a flat, secure spot on the floorboard |
| How the 24 V connects | Depends on the cart, not on a universal instruction |
| Colourway and branding | Specified per order, and worth settling early |
Confirm bench dimensions before production. A cover cut to the wrong depth either will not pull over the bench or will not stay put, and no amount of strapping fixes a cover that is the wrong size.
A short list of things this page deliberately does not state, and why:
We would rather give you a cover cut to your bench and a written specification than a headline number that will not survive a buyer’s compliance review. If any figure above is a hard requirement for your programme, raise it at the design stage and it becomes a defined, testable specification.
Dongguan Sheerfond New Material Co., Ltd. develops and manufactures far-infrared and graphene heating materials, and designs the thermal systems built around them — in both directions. Our low-voltage heating range covers 3.7 V, 5 V, 12 V, 24 V and 36 V architectures, and our cooling programmes apply the same principle in reverse. A dual-mode seat cover sits at the meeting point of both.
Products are manufactured against project specifications with batch inspection records rather than from a fixed catalogue.
Send us your bench-seat measurements, whether you need the cover alone or the full dual-mode system, your colourway and branding requirements, your packaging requirements, and your target quantity. If you know which cart the cover is going on, tell us — it helps us advise on the 24 V installation.
Price indication: the cover is quoted per project, because size, configuration and colourway all move the number. Final pricing follows your confirmed specification, order quantity and destination market.
Contact us: Request a quotation →
This product is not a medical device and is not intended to diagnose, treat, cure or prevent any disease. It provides comfort heating and cooling of a seating surface only, and does not relieve or treat any muscular, joint or circulatory condition. Never adjust the seat controls while the cart is in motion. The 24 V electrical connection, installation method and compatibility with a specific cart are confirmed per project; we publish no universal wiring instruction and make no electrical-safety claim. Temperature, heat settings, wattage, current draw and dimensions are confirmed per project.
Contact Person: Masum Billah
Tel: +8616620605160
USB Graphene Electric Heated Pad Sleeping Bag For Camping 195×75cm Size
Leather Electric Heating Desk Pad With 45degrees Temperature Sheerfond
61cm Width Electric Sleeping Bag Liner , Self Heating Sleeping Bag With 5V 2A Power
SHEERFOND Electric Pet Heating Pad , Pet Warming Mat For Dogs And Cats
Smart Electric Beverage Warmer OEM , Coffee Cup Heater 140-149Fahrenheit Temperature
Waterproof Lunch Box Warmer Heater Bag Oxford Cloth PVC Material OEM
Graphene Heating Sheet Wrist Warmer Wrist Guard Hand Heating Pad For Wrist Brace
